Makita
Showing 1–28 of 98 results
R3,499.00
DUC122Z
Guide Bar Length: 115mm
Max Chain Speed: 5m/sec
No Load Speed: 2620rpm
Oil Tank Capacity: 80ml
Voltage: 18V
Tool-less Chain Adjustment
Lightweight
Engine Brake Stops The Chain In 0.5sec
Automatic Chan Lubrication
Batteries And Charger Sold Separately
Read more
R2,799.00
DGD800Z
Voltage: 18V
Collet Capacity: 6.35mm (1/4″)
Max Wheel Size: 38mm
No Load Speed: 25,000rpm
Overall Length: 400mm
1 Year warranty
Excludes battery and charger
Read more
R5,999.00
DHP486ZJ
Add to cart
Compact tool size with an overall length of 205mm.
Variable Speed, Electric Brake, Reversing, Mechanical 2-Speed, Keyless Chuck, Torque Setting 21, Built-In Job Light and Carry Case.
BL motor delivers 125 N·m of max torque
BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
Capacity: Steel: 13mm | Wood: 76mm | Masonry: 16mm
No load speed: HI: 0-2,100r/min Lo: 0-550r/min
Impacts per min: Hi:0-31,500 Lo: 0-8,250
Chuck capacity: 1.5 - 13 mm
Max. fastening torque: Hard: 125Nm - Soft: 65Nm
Excludes battery and charger.
R3,499.00
DTD154Z
Aluminum hammer case creates the impression of rigidity of the machine.
Dual LED lights with preglow and afterglow functions illuminate the work area more widely.
T-mode has an automatic electronic controller that downshifts and reduces rotation and impact speed prior to driving screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage
to work.
Variable Speed, Electric Brake, Reversing, Electronic 3-Speed and Built-In Job Light.
Machine screw: M4-M8 Standard bolt: M5-M16
High Tensile Bolt: M5-M14
Coarse thread (in length): 22-125mm
No load speed: 0-3,600 / 0-2,100 / 0-1,100r/min
Impacts per min: 0-3,800 / 0-2,600 / 0-1,100
Battery and charger sold separately.
Read more
R5,899.00
DTW300 Z J
XPT technology that protects against dust & moisture
LED Job light with pre-glow and after-glow functions
Compact and ergonomic design at only 144 mm long
Standard bolt: M10 – M20 (3/8″ – 3/4″)
High tensile bolt: M10 – M16 (3/8″ – 5/8″)
12.7 mm (1/2″)
Max fastening torque: 330Nm
Impacts per minute: 0-4,000/0-3,400/0-2,600/0-1,800
No Load Speed: 0-3,200/0-2,600/0-1,800/0-1,000
Excludes battery and charger.
Add to cart
R3,399.00
DUN461WZ
Telescopic shaft provides reach up to 4m
10-blade positions with one touch angle adjustment
18mm maximum branch diameter
Strokes per minute: 3,600spm
Max. cutting length: 18mm
Blade Length: 460mm
Batteries & Charger Not Included
Read more
R4,499.00
DVC750 LZ
Compact. Balance of Suction Power and Work Amount
Automatic self-cleaning filtration system (optional) is designed to maintain optimum suction efficiency and longer filter life
BL motor allows 1.6 m³/min of Max air flow / 6.7 kPa of Max sealed suction / 50 W of Suction power and long run time to go together
HEPA filter is used to capture very fine particles effectively
Approved for Dust Class L in accordance with the EU standard
7.5 L Large dust bag capacity enables continuous cleaning work
Quiet operation for operator comfort
For both wet and dry vacuum cleaning
Battery compartment keeps the battery protected from harmful debris on the jobsite
Electronic 2 - Speed, Revolving Hose, Static Free Hose
Battery and charger sold separately.
Add to cart
R1,999.00
GA4550
Large paddle switch
High durability
Machined bevel gears
Tool-less wheel cover is adjustable to any desired position
Max. Wheel Thickness: 7.2mm
Max. Wheel Diameter: 115mm
Input Wattage: 1300 W
No Load Speed: 11,000 rpm
Read more
R4,299.00
DHP482RFE
22 Minute intelligent charger
21 Torque settings, maximum 62Nm
Var/Rev 2-speed: 0-600/1900Rpm
Impact rate: 0-9000/28500Bpm
13mm Keyless chuck
Carry case and LED light included
1 Year warranty
Add to cart
R3,299.00
MT2402B
No Load Speed: 3,900Rpm
Wheel Diameter: 355MM
Wheel Bore Diameter: 25.4MM
Cutting Capacity at 90°:
Round: 127 mm
Rectangular: 102 x 194 mm
Rectangular: 70 x 233 mm
Square: 119 x 119 mm
Triangular: 137 x 137 x 10 mm
High performance and durability at less expense
Powerful 2,200 W motor delivers 3,900 RPM for superior performance and durability
Adjustable guide plate provides three angle settings up to 45° L/R
Lightweight for increased job site portability
Externally accessible brushes for easy serviceability
Add to cart
R2,049.00
AF506
Operating pressure: 70 - 120ps
Length: 15 - 50 mm (5/8" - 2")
Gauge: 18 Ga
Magazine capacity: 100pcs
Add to cart
R3,699.00
JR3061T
32mm stroke with cut capacity of 255mm in wood and 130mm in pipe
Smooth cutting with vertical crank mechanism
1,250W motor for efficient cutting up to 3,000spm no load speed
Reinforced shoe with tool-less blade change and shoe adjustment
Variable speed trigger to deliver precise control
Continuous rating input: 1,250W
Length of Stroke: 32mm
Max. cutting capacities in pipe: 130mm
Max. cutting capacities in wood: 255mm
Add to cart
R1,299.00
DC18RC
Li-ion battery charger for 3Ah , 5 Ah and 6 Ah batteries
The charger communicates with the individual cell in battery with a built in CPU and then it controls current, voltage, and temperature for both rapid and optimum charge
Therefore the battery has longer life as it can be charged in the best method and duration.
Add to cart
R1,399.00
BL1830
Fuel gauge indicator displays the charge remaining on the battery in four stages
Built-in memory chip communicates the usage history with the charger
Built-in shock absorbers protect the cells from Jobsite conditions
High energy cells pack more power per cell to reduce the number of cells and overall weight
Large release button for easy removal from the tool
Built-in air vents and wall cools the battery cells evenly whilst blocking damaging debris
Add to cart
R2,199.00
BL1850
Fuel gauge indicator displays the charge remaining on the battery in four stages
The built-in memory chip communicates the usage history with the charger
Built-in shock absorbers protect the cells from Jobsite conditions
High energy cells pack more power per cell to reduce the number of cells and overall weight
Large release button for easy removal from the tool
Built-in air vents and wall cools the battery cells evenly whilst blocking damaging debris
Add to cart
R2,499.00
BL1860
Fuel gauge indicator displays the charge remaining on the battery in four stages
Built-in memory chip communicates the usage history with the charger
Built-in shock absorbers protect the cells from Jobsite conditions
High energy cells pack more power per cell to reduce the number of cells and overall weight
Large release button for easy removal from the tool
Built-in air vents and wall cools the battery cells evenly whilst blocking damaging debris
Add to cart
R2,199.00
DTW190ZK
Compact and lightweight
Max tightening torque: 190N.m
Shoulder strap and tool catcher as optional accessories
Variable Speed, Electric Brake, Reversing, Built-In Job Light, and Carry Case.
Battery and charger sold separately. The tool does not come with a socket.
Voltage: 18V
Capacity:
Standard bolt: M8-M16 High tensile bolt: M8-M12
Square drive: 12.7mm
No load speed / Impacts per min: 2,300r/min / 3,000i/min
Max. fastening torque: 190N.m
Add to cart
R899.95
DML801
Excludes battery and charger
Rotatable and foldable head
12 LEDs
9 Hours of illumination on a fully charged 3Ah battery
2 Stage switch for 12 or 6 LEDs
Includes metal hook and rubber grip
1 Year Warranty
Add to cart
R2,499.00
DGA452ZK
Powerful angle grinder now free from cord.
Only compatible with BL1830 3.0Ah Li-Ion battery.
Capable of using wheels/discs for AC grinders.
Easy to grip, small circumference motor housing.
Anti-restart function for safety (with warning lamp).
Electronic current limiter (with warning lamp).
Includes Carry Case.
Battery and charger sold separately.
Voltage: 18V
Wheel diameter: 115mm
No load speed (r/min): 10,000
Add to cart
R1,249.00
Add to cart
DUB182Z
High / Medium / Low air volume settings.
Ergonomically designed rubberized grip.
Anti-static electricity for comfortable operation.
Variable Speed.
Battery and charger sold separately.
Voltage: 18V
Air volume / speed / pressure:
2.6m³/min / 80m/s / 5.4kPa (550mm H2O)
No load speed (r/min): 0-18,000r/min
Net Weight: 1.7kg
Annual Magazine 2023, Circular saws, Festive Savings 2024, MAKITA, Power Tools, Power Tools, POWER TOOLS
R3,899.95
DSS610ZK
Smooth and powerful cutting at a high rotational speed of 3,700r/min.
Rubberized soft grip provides more control and comfort.
Safety cover with calibration line for adjusting cutting depth.
The rigid aluminum base provides high quality and toughness.
Battery and charger sold separately.
Voltage: 18V
Blade diameter: 165mm
Capacity:
At 0 degrees: 57mm At 45 degrees: 40mm
Bore size: 20mm
No-load speed: 3,700r/min
Add to cart
Annual Magazine 2023, Festive Savings 2024, Leaf blowers, MAKITA, Power Tools, POWER TOOLS, Power Tools
R1,499.00
DUB186Z
Tool only
Air volume: 2.6m3/min
Airspeed: 52m/second
Variable speed: 0-18000Rpm
Includes 530mm angled nozzle
Excludes battery and charger
1-year warranty
Add to cart
R1,599.00
Optimum cordless cleaner for contractors or factory
Strong suction power 30W.
T-nozzle with enhanced manoeuvrability
Rubberized soft grip reduces hand fatigue even in long continuous use.
Low noise emission: 71dB
Electronic 2-Speed and Soft Start.
Battery and charger sold separately.
Add to cart
